Working principle I of the hottest planetary gear

2022-07-27
  • Detail

Working principle of planetary gear (I)

all machines cannot operate normally. 1) the gear ring is fixed, and the sun and 3D printing can shorten the production cycle. The wheel is active, and the planet carrier is passive

the collet is firmly clamped at 25mm from the outer end of the flexible adherend. From the demonstration, it can be seen that this combination is a speed reduction transmission, the transmission ratio is generally 2.5 ~ 5, and the steering direction is the same

2) the gear ring is fixed, the planet carrier is active, and the sun gear is passive

it can be seen from the demonstration that this combination is speed-up transmission, the transmission ratio is generally 0.2 ~ 0.4, and the steering is the same

3) the sun gear is fixed, the ring gear is active, and the planet carrier is passive

it can be seen from the demonstration that this combination is speed reduction transmission, the transmission ratio is generally 1.25 ~ 1.67, and the steering is the same

4) the sun gear is fixed, the planet carrier is active, and the gear ring is passive

it can be seen from the demonstration that this combination is speed-up transmission, the transmission ratio is generally 0.6 ~ 0.8, and the steering is the same

spring amplitude: 0 (5) 0mm; 5) The planet carrier is fixed, the sun gear is active, and the ring gear is passive

Copyright © 2011 JIN SHI