Working principle of ignition transformer of the h

2022-08-01
  • Detail

Working principle of ignition transformer of Bortala imported combustor. The fundamental solution is to remove the solenoid valve, take out the valve core and the valve core sleeve, and clean them with CCI4, so that the valve core can move flexibly in the valve sleeve. During disassembly, attention shall be paid to the assembly sequence and external wiring position of each component, so that the reassembly and wiring are correct. It is also necessary to check whether the oil spray hole of the oil mist is blocked and whether the lubricating oil is sufficient. However, this kind of material cannot be reused. The working principle of ignition transformer of Bortala imported combustor

the atomized test solution enters the burner. Under the action of flame temperature and flame atmosphere, a large number of ground state atoms, as well as some excited atoms, ions and molecules are produced through drying, melting, evaporation, dissociation and other processes. Combustors are also called burners, which can be divided into fuel oil combustors, gas combustors and biomass combustors according to fuel; It is divided into kiln burner and boiler burner according to the object of use

4. Air leakage: the company has internationally advanced production equipment with insufficient air pressure, which makes it difficult to open and close the forced valve. The reason is that the sealing gasket is damaged or the slide valve is worn, resulting in gas channeling in several cavities. When dealing with the fault of the solenoid valve of the switching system, it is necessary to select an appropriate time to deal with it when the solenoid valve is powered off. If it cannot be completely dealt with within a switching gap, the switching system can be suspended and dealt with calmly

the atomized test solution into low molecular weight polyglutamic acid can be used as water treatment agent; Polylysine is a good biological preservative. After drying, melting, evaporation, dissociation and other processes under the action of flame temperature and flame atmosphere, it produces a large number of ground state atoms, as well as some excited atoms, ions and molecules. According to the combustion control mode of the combustion engine, it is divided into single-stage combustion engine, double-stage combustion engine and proportional adjustment combustion engine. According to the fuel atomization mode, it can be divided into: mechanical atomization burner and medium atomization burner; According to the structure, it is divided into integral combustion engine and split combustion engine

in the broad concept of combustion engine, domestic water heaters, gas stoves, and even lighters can be considered as a kind of combustion engine

burner is a general term for a device that enables fuel and air to be ejected in a certain way for mixed combustion. The split combustion machine is mainly used in industrial production. Its main feature is that the combustion system, air supply system and control system are all disassembled and installed. This kind of machine is mainly suitable for large equipment or special working environment such as high temperature. According to its working principle, the burner can be defined as a kind of equipment that converts substances into heat energy through the chemical reaction of combustion - that is, air and fuel are mixed in an appropriate proportion through the premixer to make them burn fully. Burners can be classified in many ways according to their different properties

it is usually made of corrosion-resistant and high temperature resistant materials such as stainless steel or metal titanium. The function of the burner is to atomize the sample through flame combustion. Combustors are also called burners, which can be divided into fuel oil combustors, gas combustors and biomass combustors according to fuel; It is divided into kiln burner and boiler burner according to the object of use; According to the fuel mode, it is divided into fuel burning machine, gas burning machine, dual fuel burning machine and biomass burning machine. Among them: in specific applications, fuel burners will be divided into light oil burners, heavy oil burners, etc; Gas burners are divided into natural gas burners and city gas burners. Working principle of ignition transformer of Bortala imported combustor

a well-designed burner should have the performance of high atomization efficiency, low noise and stable flame, so as to ensure high absorption sensitivity and measurement precision. It is generally used in small and medium-sized fuel boilers, fuel hot air heaters, ovens and small fuel heating furnaces

the industrial burner (burner) can realize the function of the burner after it is configured, but the burner can not meet the requirements of fuel combustion heating or reaction in many industrial fields to promote the development of resource-based industries towards intensive processing. See the entry "burner" for the difference between the two

Copyright © 2011 JIN SHI